D-Link DES-1210-52/ME - Disable Dhcpv6_Relay; Show Dhcpv6_Relay

DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
124
To enable DCHPv6 Relay on the Switch:
DES-1210-52/ME:5# enable dhcpc6_relay
Command: enable dhcpc6_relay
Success.
DES-1210-52/ME:5#
disable dhcpv6_relay
Purpose
To disable DHCPv6 Relay function on the Switch
Syntax
disable dhcpv6_relay
Description
The disable dhcpv6_relay command is used to disable the
DHCPv6 relay global state on the Switch.
Parameters
None.
Restrictions
Only Administrator or operator-level users can issue this command.
Example usage:
To disable DHCPv6 Relay on the Switch:
DES-1210-52/ME:5# disable dhcpv6_relay
Command: disable dhcpv6_relay
Success.
DES-1210-52/ME:5#
show dhcpv6_relay
Purpose
To display the current DHCPv6 relay configuration.
Syntax
show dhcpv6_relay {ipif system}
Description
The show dhcpv6_relay command displays the current DHCPv6
relay configuration of all interfaces, or if an IP interface name is
specified, the DHCPv6 relay configuration for that IP interface.
Parameters
None.
Purpose
To display the current DHCPv6 relay configuration.
Example usage:
To display DHCPv6 Relay settings:
DES-1210-52/ME:5# show dhcpv6_relay
Command: show dhcpv6_relay
DHCPv6 Relay Global State : enable
DHCPv6 Hops Count Limit : 4
DHCPv6 Relay Option37 State : enable
DHCPv6 Relay Option37 Check State : enable