D-Link DES-1210-52/ME - Delete Rmon Alarm; Create Rmon Collection Stats

DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
205
counter value that triggers the rising threshold alarm.
<rising_event_index 1-65535> − Specifies the event that triggers the
specific alarm.
falling-threshold <value 0-2147483647> − Specifies the falling
counter value that triggers the falling threshold alarm.
<falling_event_index 1-65535> − Specifies the event that triggers
the specific alarm. The possible field values are user defined RMON
events.
owner <owner_string 32> − Specifies the device or user that defined
the alarm.
Restrictions
Only Administrator or operator-level users can issue this command.
Example usage:
To create a RMON alarm on the Switch:
DES-1210-52/ME:5# create rmon alarm 20 1 100 absolute rising-threshold
200 2 falling-threshold 100 1 owner dlink
Command: create rmon alarm 20 1 100 absolute rising-threshold 200 2
falling-threshold 100 1 owner dlink
Success.
DES-1210-52/ME:5#
delete rmon alarm
Purpose
To remove the network alarms.
Syntax
delete rmon alarm <alarm_index 1-65535>
Description
The delete rmon alarm command removes the network alarms.
Parameters
<alarm_index 1-65535> − Specifies the alarm number to be
removed.
Restrictions
Only Administrator or operator-level users can issue this command.
Example usage:
To delete a RMON alarm on the Switch:
DES-1210-52/ME:5# delete rmon alarm 100
Command: delete rmon alarm 100
Success.
DES-1210-52/ME:5#
create rmon collection stats
Purpose
To allow user to configure the rmon stats settings on the Switch.
Syntax
create rmon collection stats <stats_index 1-65535> port
<ifindex> owner <owner_string 32>
Description
The create rmon collection stats command allows user to
configure the rmon stats settings on the Switch.
Parameters
<stats_index 1-65535> − Specifies the stats number.