D-Link DES-1210-52/ME - Disable Asymmetric_Vlan; Show Asymmetric_Vlan

DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
225
Command: enable asymmetric_vlan
Warning: The settings of VLAN, IGMP Snooping,Management VLAN,
802.1v, and MAC Address Table will be reset to default.
Success.
DES-1210-52/ME:5#
disable asymmetric_vlan
Purpose
To disable Asymmetric VLAN on the switch.
Syntax
disable asymmetric_vlan
Description
The disable asymmetric_vlan command, along with the enable
asymmetric_vlan command below, is used to disable and enable
Asymmetric VLAN on the Switch.
Parameters
None.
Restrictions
Only administrator or operator-level users can issue this command.
Example usage:
To disable asymmetric_vlan on the switch:
DES-1210-52/ME:5# disable asymmetric_vlan
Command: disable asymmetric_vlan
Success.
DES-1210-52/ME:5#
show asymmetric_vlan
Purpose
To display the Asymmetric VLAN status on the Switch.
Syntax
show asymmetric_vlan
Description
The show asymmetric_vlan command displays the Asymmetric
VLAN status on the Switch.
Parameters
None.
Restrictions
None.
Example usage:
To display Asymmetric VLAN status:
DES-1210-52/ME:5# show asymmetric_vlan
Command: show asymmetric_vlan
Asymmetric VLAN : Enable
DES-1210-52/ME:5#