D-Link DES-1210-52/ME

To Next Page

To Previous Page

DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide

227

Parameters

None.

Restrictions

None.

Example usage:

To display the auto-assign PVID state:

DES-1210-52/ME:5# show pvid auto_assign

Command: show pvid auto_assign

PVID Auto-assignment: Enabled

DES-1210-52/ME:5#

Main Page

Default Chapter4
- Table of Contents4
Introduction19
Using the Console Cli21
Command Syntax24
Basic Switch Commands26
- Enable Password Encryption27
- Disable Password Encryption27
- Create Account28
- Config Account29
- Show Account29
- Delete Account30
- Reset Account30
- Show Session31
- Show Switch31
- Enable Jumbo_Frame32
- Disable Jumbo_Frame32
- Show Jumbo_Frame33
- Config Bootrom Password33
- Enable Clipaging34
- Disable Clipaging34
- Enable Web34
- Disable Web35
- Enable Autoconfig35
- Disable Autoconfig36
- Config Autoconfig36
- Show Autoconfig37
- Enable Auto Learning37
- Disable Auto Learning37
- Save38
- Reload Config38
- Reboot39
- Reset42
- Logout43
- Ping43
- Ping644
- Traceroute45
- Traceroute645
- Show Cpu Port46
- Reset Cpu Port47
- Enable Telnet47
- Disable Telnet48
- Telnet48
- Config Time_Range48
- Show Time_Range49
- Show Tech Support50
- Clear Tech Support51
Dhcp Autoimage Commands52
- Enable Autoimage52
- Disable Autoimage52
- Show Autoimage53
Smtp Server Commands54
- Enable Smtp54
- Disable Smtp54
- Config Smtp55
- Show Smtp55
- Smtp Sent_Testmsg56
Modify Banner and Prompt Commands58
- Config Command_Prompt58
- Config Greeting_Message59
- Show Greeting_Message60
Switch Port Commands61
- Config Ports61
- Config Ports62
- Show Ports63
- Delete Ports63
Loopback Detection Commands65
- Enable Loopdetect65
- Disable Loopdetect65
- Config Loopdetect Mode66
- Config Loopdetect Ports66
- Config Loopdetect67
- Show Loopdetect67
Dos Prevention Commands69
- Config Dos_Prevention Dos_Type69
- Show Dos_Prevention70
- Enable Dos_Prevention Trap_Log71
- Disable Dos_Prevention Trap_Log71
Pppoe Circuit ID Insertion Commands72
- Config Pppoe Circuit_Id_Insertion State72
- Config Pppoe Circuit_Id_Insertion Ports73
- Show Pppoe Circuit_Id_Insertion73
- Show Pppoe Circuit_Id_Insertion Ports74
Dhcp Server Screening Commands75
- Config Filter Dhcp_Server75
- Config Filter Dhcp_Server76
- Config Filter Dhcp_Server Log State77
- Show Filter Dhcp_Server77
- Show Dhcp_Server Screening77
- Create Filter Dhcpv6_Server Permit_Entry78
- Delete Filter Dhcpv6_Server Permit_Entry79
- Config Filter Dhcpv6_Server Ports79
- Config Filter Dhcpv6_Server Log State80
- Show Filter Dhcpv6_Server80
Ip-Mac-Port Binding Commands81
- Create Address_Binding Ip_Mac82
- Config Address_Binding Ip_Mac Ports83
- Config Address_Binding Ip_Mac Log83
- Show Address_Binding Ip_Mac Log84
- Config Address_Binding Auto_Scan84
- Config Address_Binding Auto_Scan Ipv6Address84
- Delete Address_Binding85
- Show Address_Binding86
- Show Address_Binding Auto_Scan List87
- Enable Address_Binding Dhcp_Snoop87
- Disable Address_Binding Dhcp_Snoop87
- Config Address_Binding Dhcp_Snoop Max_Entry Ports88
- Show Address_Binding Dhcp_Snoop88
- Enable Address_Binding Dhcp_Pd_Snoop89
- Disable Address_Binding Dhcp_Pd_Snoop89
- Show Address_Binding Dhcp_Pd_Snoop90
- Enable Address_Binding Roaming90
- Disable Address_Binding Roaming91
- Show Address_Binding Roaming91
- Clear Address_Binding Dhcp_Snoop Binding_Entry Ports91
Network Management (Snmp) Commands93
- Create Snmp User96
- Delete Snmp User97
- Show Snmp User97
- Create Snmp View98
- Delete Snmp View98
- Show Snmp View99
- Create Snmp Community99
- Delete Snmp Community100
- Show Snmp Community100
- Config Snmp Engineid101
- Show Snmp Engineid101
- Create Snmp Group102
- Delete Snmp Group103
- Show Snmp Global State104
- Show Snmp Groups104
- Create Snmp Host105
- Delete Snmp Host106
- Show Snmp Host106
- Create Snmp V6Host107
- Delete Snmp V6Host108
- Show Snmp V6Host108
- Enable Trusted_Host109
- Disable Trusted_Host109
- Create Trusted_Host110
- Show Trusted_Host111
- Delete Trusted_Host111
- Enable Snmp Traps112
- Disable Snmp Traps112
- Enable Snmp Authenticate_Traps113
- Disable Snmp Authenticate_Traps113
- Show Snmp Traps113
- Enable Snmp Linkchange_Traps114
- Disable Snmp Linkchange_Traps114
- Config Snmp Linkchange_Traps Ports115
- Show Snmp Traps Linkchange_Traps115
- Config Snmp System_Contact116
- Config Snmp System_Location116
- Config Snmp System_Name117
- Config Snmp Warmstart_Traps117
- Config Snmp Coldstart_Traps118
- Enable Snmp118
- Disable Snmp118
- Enable Snmp DHCP_ Screening Traps119
- Disable Snmp DHCP_ Screening Traps119
- Enable Snmp Dhcpv6_ Screening Traps119
- Disable Snmp Dhcpv6_ Screening Traps120
- Enable Snmp Impb_Violation Traps120
- Disable Snmp Impb_Violation Traps121
- Enable Snmp Firmware_Upgrade_State Traps121
- Disable Snmp Firmware_Upgrade_State Traps121
- Enable Snmp LBD Traps122
- Disable Snmp LBD Traps122
- Enable Snmp Port_Security_Violation Traps123
- Disable Snmp Port_Security_Violation Traps123
- Enable Snmp Rstpport_State_Change Traps123
- Disable Snmp Rstpport_State_Change Traps124
- Enable Snmp Duplicate_Ip_Detected Traps124
- Disable Snmp Duplicate_Ip_Detected Traps125
Download/Upload Commands126
- Download126
- Upload127
- Config Configuration Config_Id128
- Show Firmware Information128
- Show Config129
- Show Boot_File130
- Config Firmware Image_Id130
Dhcp Relay Commands132
- Enable Dhcp_Relay133
- Disable Dhcp_Relay133
- Config Dhcp_Relay Port134
- Config Dhcp_Relay Add Ipif System134
- Config Dhcp_Relay Delete Ipif System135
- Config Dhcp_Relay Hops135
- Config Dhcp_Relay Vlan135
- Config Dhcp_Relay Option_82136
- Config Dhcp_Relay Port_Option_82137
- Show Dhcp_Relay Port_Option_82138
- Show Dhcp_Relay138
- Enable Dhcp_Local_Relay139
- Disable Dhcp_Local_Relay139
- Config Dhcp_Local_Relay Port140
- Config Dhcp_Local_Relay Vlan140
- Show Dhcp_Local_Relay141
- Enable Dhcpv6_Relay141
- Disable Dhcpv6_Relay142
- Show Dhcpv6_Relay142
- Config Dhcpv6_Relay143
- Config Dhcpv6_Relay Hop_Count143
- Config Dhcpv6_Relay Option_18144
- Config Dhcpv6_Relay Option_37145
- Config Dhcpv6_Relay Option_38145
- Show Dhcpv6_Relay Option_38146
Cpu Protection Commands147
- Enable Cpu_Protect147
- Disable Cpu_Protect147
- Config Cpu_Protect Type148
- Show Cpu_Protect148
Gratuitous Arp Commands150
- Config Gratuitous_Arp Send Ipif_Status_Up150
- Config Gratuitous_Arp Send Dup_Ip_Detected151
- Config Gratuitous_Arp Learning151
- Enable Gratuitous_Arp Log152
- Disable Gratuitous_Arp Log152
- Show Gratuitous_Arp153
- Config Gratuitous_Arp Send Periodically153
Power Saving Commands155
- Config Power_Saving Mode155
- Config Power_Saving155
- Show Power_Saving156
Network Monitoring Commands157
- Show Packet Ports157
- Show Error Ports158
- Show Utilization159
- Clear Counters160
- Save Log160
- Clear Log160
- Show Log161
- Enable Syslog161
- Disable Syslog162
- Show Syslog162
- Create Syslog Host163
- Config Syslog Host165
- Delete Syslog Host167
- Show Syslog Host167
- Cable Diagnostic Port168
- Config Syslogintimeout168
Spanning Tree Commands171
- Config Stp171
- Config Stp Ports172
- Config Stp Version174
- Config Stp Fbpdu174
- Config Stp Priority175
- Enable Stp175
- Disable Stp175
- Show Stp176
- Show Stp Ports177
- Show Stp Instance177
- Show Stp Mst_Config_Id178
- Create Stp Instance_Id178
- Delete Stp Instance_Id179
- Config Stp Instance_Id179
- Config Stp Mst_Config_Id180
- Config Stp Mst_Ports181
- Config Stp Trap182
Forwarding Database Commands183
- Create Fdb183
- Create Multicast_Fdb184
- Config Multicast_Fdb184
- Config Fdb Aging_Time185
- Delete Fdb185
- Enable Flood_Fdb186
- Disable Flood_Fdb186
- Config Flood_Fdb187
- Show Flood_Fdb187
- Clear Flood_Fdb187
- Show Flow_Meter188
- Show Multicast_Fdb188
- Show Fdb189
- Config Multicast Filter190
- Show Multicast Filter Port_Mode190
- Create Auto_Fdb191
- Delete Auto_Fdb191
- Show Auto_Fdb192
Broadcast Storm Control Commands193
- Config Traffic Control193
- Config Traffic Control Auto_Recover_Time194
- Show Traffic Control194
- Config Traffic Trap195
Password Recovery Commands196
- Enable Password_Recovery196
- Disable Password_Recovery196
- Show Password_Recovery197
Qos Commands198
- Config Scheduling199
- Show Scheduling200
- Config Bandwidth_Control201
- Show Bandwidth_Control202
- Config Cos Mac_Mapping202
- Show Cos Mac_Mapping203
- Delete Cos Mac_Mapping203
- Config Cos Ip_Mapping204
- Show Cos Ip_Mapping204
- Delete Cos Ip_Mapping205
- Config Cos Ipv6_Mapping205
- Show Cos Ipv6_Mapping205
- Delete Cos Ipv6_Mapping206
- Config Cos Ipv6_Tc_Mapping206
- Delete Cos Ipv6_Tc_Mapping207
- Show Cos Ipv6_Tc_Mapping207
- Config Cos Mapping208
- Show Cos Mapping208
- Config Cos Protocol_Mapping209
- Show Cos Protocol_Mapping209
- Delete Cos Protocol_Mapping210
- Config Cos Vlanid_Mapping210
- Show Cos Vlanid_Mapping211
- Delete Cos Vlanid_Mapping211
- Config Cos Tos Value211
- Show Cos Tos212
- Config Cos Tcp_Port_Mapping213
- Show Cos Tcp_Port_Mapping213
- Delete Cos Tcp_Port_Mapping213
- Config Cos Udp_Port_Mapping214
- Show Cos Udp _Port_Mapping214
- Delete Cos Udp_Port_Mapping215
- Config 802.1P User_Priority215
- Show 802.1P User_Priority216
- Config 802.1P Default_Priority217
- Show 802.1P Default_Priority217
- Config Scheduling_Mechanism218
- Show Scheduling_Mechanism218
- Config Dscp Mode219
- Config Dscp_Mapping219
- Show Dscp_Mapping220
Rmon Commands221
- Enable Rmon221
- Disable Rmon222
- Create Rmon Alarm222
- Delete Rmon Alarm223
- Create Rmon Collection Stats223
- Delete Rmon Collection Stats224
- Create Rmon Collection History224
- Delete Rmon Collection History225
- Create Rmon Event225
- Delete Rmon Event226
- Show Rmon226
- Show Rmon Statistics227
Port Mirroring Commands228
- Enable Mirror228
- Disable Mirror228
- Config Mirror Target229
- Show Mirror230
Vlan Commands231
- Create Vlan232
- Delete Vlan232
- Config Vlan233
- Config Gvrp233
- Config Gvrp Timer234
- Enable Gvrp235
- Disable Gvrp235
- Show Vlan235
- Create Dot1V_Protocol_Group236
- Config Dot1V_Protocol_Group237
- Delete Dot1V_Protocol_Group237
- Show Dot1V_Protocol_Group238
- Config Port Dot1V Ports All238
- Show Port Dot1V239
- Show Gvrp240
- Show Gvrp Timer240
- Enable Vlan_Trunk241
- Disable Vlan_Trunk241
- Show Vlan_Trunk241
- Config Vlan_Trunk Ports242
- Enable Asymmetric_Vlan242
- Disable Asymmetric_Vlan243
- Show Asymmetric_Vlan243
- Enable Pvid Auto_Assign244
- Disalbe Pvid Auto_Assign244
- Show Pvid Auto_Assign244
Q-In-Q Commands246
- Enable Qinq246
- Disable Qinq247
- Show Qinq247
- Config Qinq Ports248
- Config Qinq Inner_Tpid248
- Create Vlan_Translation249
- Show Vlan_Translation249
- Delete Vlan_Translation CVID250
Link Aggregation Commands251
- Create Link_Aggregation251
- Delete Link_Aggregation252
- Config Link_Aggregation Group_Id252
- Config Link_Aggregation Algorithm253
- Config Link_Aggregation State253
- Show Link_Aggregation254
Basic Ip Commands255
- Create Ipif255
- Delete Ipif256
- Enable Ipif256
- Disable Ipif256
- Config Ipif257
Bpdu Attack Protection Commands259
- Config Bpdu_Protection Ports259
- Config Bpdu_Protection Recovery_Timer260
- Config Bpdu_Protection261
- Enable Bpdu_Protection261
- Disable Bpdu_Protection262
- Show Bpdu_Protection262
Ethernet Oam Commands264
- Config Ethernet_Oam Ports264
- Config Ethernet_Oam Ports265
- Show Ethernet_Oam Ports266
- Show Ethernet_Oam Ports267
- Show Ethernet_Oam Ports268
- Show Ethernet_Oam Ports269
- Clear Ethernet_Oam Ports270
Mac Notification Commands271
- Enable Mac_Notification271
- Disable Mac_Notification271
- Config Mac_Notification272
- Config Mac_Notification Ports272
- Show Mac_Notification273
- Show Mac_Notification Ports273
Igmp Snooping Commands275
- Config Igmp_Snooping276
- Config Igmp_Snooping Querier277
- Create Igmp_Snooping Multicast_Vlan278
- Config Igmp_Snooping Multicast_Vlan278
- Delete Igmp_Snooping Multicast_Vlan279
- Config Igmp_Snooping Multicast_Vlan_Group279
- Create Igmp_Snooping Static_Group280
- Config Igmp_Snooping Static_Group280
- Delete Igmp_Snooping Static_Group281
- Show Igmp_Snooping Static_Group281
- Config Igmp_Snooping Data_Driven_Learning282
- Config Igmp_Snooping Data_Driven_Learning283
- Clear Igmp_Snooping Data_Driven_Group283
- Config Router_Ports284
- Config Router_Ports_Forbidden284
- Config Igmp Access_Authentication Ports285
- Show Igmp Access_Authentication Ports285
- Enable Igmp_Snooping286
- Disable Igmp_Snooping286
- Show Igmp_Snooping287
- Show Igmp_Snooping Group288
- Show Igmp_Snooping Forwarding288
- Show Igmp_Snooping Host289
- Show Igmp_Snooping Multicast_Vlan290
- Show Igmp_Snooping Multicast_Vlan_Group290
- Show Router_Ports291
Digital Diagnostic Monitoring Commands292
- Config DDM Ports292
- Config DDM Power_Unit293
- Show DDM Ports293
Mld Snooping Commands295
- Enable Mld_Snooping296
- Disable Mld_Snooping296
- Config Mld_Snooping297
- Create Mld_Snooping Multicast_Vlan297
- Config Mld_Snooping Multicast_Vlan298
- Show Mld_Snooping Multicast_Vlan299
- Delete Mld_Snooping Multicast_Vlan299
- Config Mld_Snooping Multicast_Vlan_Group300
- Show Mld_Snooping Multicast_Vlan_Group300
- Config Mld_Snooping Mrouter_Ports301
- Config Mld_Snooping Mrouter_Port_Forbidden301
- Config Mld_Snooping Querier302
- Config Mld_Snooping Data_Driven_Learning303
- Clear Mld_Snooping Data_Driven_Group304
- Show Mld_Snooping304
- Show Mld_Snooping Forwarding305
- Show Mld_Snooping Group306
- Show Mld_Snooping Mrouter_Ports306
- Show Mld_Snooping Host307
Limited Ip Multicast Address Commands308
- Create Mcast_Filter_Profile308
- Config Mcast_Filter_Profile Profile_Id309
- Config Mcast_Filter_Profile Profile_Name309
- Config Mcast_Filter_Profile Ipv6310
- Delete Mcast_Filter_Profile310
- Show Mcast_Filter_Profile311
- Config Limited_Multicast_Addr312
- Show Limited_Multicast_Addr312
- Config Max_Mcast_Group313
- Show Max_Mcast_Group313
Layer 2 Protocol Tunneling Commands315
- Enable L2Protocol_Tunnel315
- Disable L2Protocol_Tunnel315
- Config L2Protocol_Tunnel316
- Show L2Protocol_Tunnel316
802.1X Commands318
- Enable 802.1X319
- Disable 802.1X319
- Show 802.1X320
- Show 802.1X Auth_State320
- Show 802.1X Auth_Configuration321
- Config 802.1X Auth_Parameter Ports322
- Config 802.1X Init323
- Config 802.1X Auth_Protocol324
- Config 802.1X Reauth324
- Config Radius Add325
- Config Radius Delete326
- Config Radius326
- Show Radius327
- Config 802.1X Fwd_Pdu System327
- Show 802.1X Fwd_Pdu System Status328
- Config 802.1X Auth_Mode328
- Create 802.1X Guest_Vlan329
- Delete 802.1X Guest_Vlan329
- Config 802.1X Guest_Vlan Ports330
- Show 802.1X Guest_Vlan330
- Create 802.1X User331
- Show 802.1X User331
- Delete 802.1X User332
- Config 802.1X Capability Ports332
Port Security Commands334
- Config Port_Security334
- Show Port_Security335
- Delete Port_Security _Entry336
Time and Sntp Commands337
- Config Sntp337
- Show Sntp338
- Enable Sntp338
- Disable Sntp339
- Config Time339
- Config Time_Zone Operator340
- Config Dst340
- Show Time341
Arp Commands343
- Create Arpspoofing343
- Show Arpspoofing344
- Delete Arpspoofing344
- Config Arp_Aging Time345
- Clear Arptable345
- Create Arpentry346
- Config Arpentry346
- Delete Arpentry347
- Show Arpentry347
- Show Arpentry Aging_Time348
Routing Table Commands349
- Create Iproute349
- Delete Iproute350
- Show Iproute350
Static Mac_Based Vlan Commands351
- Create Mac_Based_Vlan Mac_Address351
- Delete Mac_Based_Vlan352
- Show Mac_Based_Vlan352
D-Link Unidirectional Link Detection (Duld) Commands353
- Config Duld Ports353
- Show Duld Ports354
- Config Duld Recover_Timer354
- Show Duld Recover_Timer355
Ipv6 Neighbor Discovery Commands356
- Create Ipv6 Neighbor_Cache356
- Delete Ipv6 Neighbor_Cache357
- Show Ipv6 Neighbor_Cache357
- Show Ipv6 Nd358
- Config Ipv6 Nd Ns Ipif System358
- Create Ipv6Route Default359
- Delete Ipv6Route Default359
- Show Ipv6Route360
- Enable Ipif_Ipv6_Link_Local_Auto System360
- Disable Ipif_Ipv6_Link_Local_Auto System361
Banner Commands362
- Config Log_Save_Timing362
- Show Log_Save_Timing363
- Show Log_Software_Module363
- Show Log364
Command History List Commands365
- Show Command_History366
- Dir367
Ssh Commands368
- Enable Ssh368
- Disable Ssh369
- Config Ssh Algorithm369
- Config Ssh Authmode370
- Show Ssh Authmode370
- Config Ssh Server371
- Show Ssh Server371
- Show Ssh Algorithm372
- Config Ssh User373
- Show Ssh User Authmode373
Ssl Commands374
- Enable Ssl374
- Disable Ssl375
- Show Ssl375
- Download Ssl Certificate376
Access Authentication Control Commands377
- Create Authen_Login Method_List_Name378
- Config Authen_Login378
- Delete Authen_Login Method_List_Name380
- Show Authen_Login380
- Show Authen_Policy381
- Create Authen_Enable Method_List_Name381
- Config Authen_Enable382
- Delete Authen_Enable Method_List_Name383
- Show Authen_Enable384
- Enable Authen_Policy384
- Disable Authen_Policy385
- Config Authen Application385
- Show Authen Application386
- Config Authen Parameter387
- Show Authen Parameter387
- Create Authen Server_Host387
- Config Authen Server_Host389
- Delete Authen Server_Host390
- Show Authen Server_Host390
- Create Authen Server_Group391
- Config Authen Server_Group392
- Delete Authen Server_Group392
- Show Authen Server_Group393
- Enable Admin394
- Config Admin Local_Enable394
Lacp Commands396
- Config Lacp Port_Priority396
- Show Lacp396
- Config Lacp_Ports397
Lldp Commands399
- Enable Lldp400
- Disable Lldp400
- Config Lldp Message_Tx_Interval400
- Config Lldp Message_Tx_Hold_Multiplier401
- Config Lldp Reinit_Delay401
- Config Lldp Tx_Delay402
- Config Lldp Notification_Interval402
- Show Lldp402
- Show Lldp Ports403
- Show Lldp Local_Ports404
- Show Lldp Remote_Ports404
- Config Lldp Ports405
- Show Lldp Power_Pse_Tlv409
- Show Lldp Mgt_Addr410
- Show Lldp Statistics411
Access Control List Commands412
- Create Access_Profile413
- Config Access_Profile415
- Delete Access_Profile419
- Show Access_Profile419
- Create Cpu_Access_Profile420
- Config Cpu_Access_Profile421
- Delete Cpu_Access_Profile423
- Enable Cpu_Interface_Filtering424
- Disable Cpu_Interface_Filtering424
- Show Cpu_Access_Profile425
- Config Flow_Meter Profile_Id425
Traffic Segmentation Commands427
- Config Traffic_Segmentation427
- Show Traffic_Segmentation427
Safeguard Commands429
- Config Safeguard_Engine429
- Show Safeguard_Engine429
Device Specifications431
- Technical Specifications431
- Supported Transceivers433

D-Link DES-1210-52/ME - Page 245

Table of Contents

Related product manuals