D-Link DES-1210-52/ME - Clear Ethernet_Oam Ports

DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
252
-----------------------------------------------------------------------
Event Listing
Index Type Location Time Stamp
----- ------------------------------------------ ------------- ---------------------
Local Event Statistics
Error Symbol Event : 0
Error Frame Event : 0
Error Frame Period Event : 0
Errored Frame Seconds Event : 0
Dying Gasp : 0
Critical Event : 0
Remote Event Statistics
Error Symbol Event : 0
Error Frame Event : 0
Error Frame Period Event : 0
Errored Frame Seconds Event : 0
Dying Gasp : 0
Critical Event : 0
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a ALL
clear ethernet_oam ports
Purpose
Used to clear Ehternet OAM event log or statistics.
Syntax
clear ethernet_oam ports [<portlist> | all] [event_log |
statistics]
Description
The clear ethernet_oam ports command is used to clear ports
Ethernet OAM event log or statistics information.
Parameters
[<portlist> | all] − Specifies a port, a range of ports or all ports
information to be cleared.
[event_log | statistics] − Specifies event log or statistics information
to be cleared.
Restrictions
Only administrator or operator-level users can issue this command.
Example usage:
To clear port 1 OAM statistics:
DES-1210-52/ME:5# clear ethernet_oam ports 1 statistics
Command: clear ethernet_oam ports 1 statistics
Success.
DES-1210-52/ME:5#