D-Link DES-1210-52/ME - Delete Igmp_Snooping Static_Group; Show Igmp_Snooping Static_Group

DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
263
following parameter <ipaddr>.
<ipaddr> − Specify the IP address to be configured with the IGMP
snooping static group.
Restrictions
Only administrator or operator-level users can issue this command.
Example usage:
To add port 5 to static group 226.1.1.1 on VID 1:
DES-1210-52/ME:5# config igmp_snooping static group vlanid 1 226.1.1.1 and 5
Success.DES-1210-52/ME:5#
delete igmp_snooping static_group
Purpose
To delete the current IGMP snooping static group on the Switch.
Syntax
delete igmp_snooping static_group [vlan <vlan_name 32> |
vlanid <vlanid_list>] <ipaddr>
Description
The delete igmp_snooping static_group command is used to
delete an IGMP snooping statie group will not affect the IGMP
snooping dynamic member ports of a group.
Parameters
<vlan_name 32> − The name of the VLAN for which IGMP snooping
statis group is to be created. Up to 32 characters can be used.
<vlanid_list> − The ID of the VLAN for which IGMP snooping static
group is to be created. The range is from 2 to 4094.
<ipaddr> − Specify the static group address for which IGMP
snooping to be deleted.
Restrictions
Only administrator or operator-level users can issue this command.
Example usage:
To delete a static group 226.1.1.1 on VID 1:
DES-1210-52/ME:5# delete igmp_snooping static_group vlanid 1 226.1.1.1
Command: delete igmp_snooping static_group vlanid 1 226.1.1.1
Success.
DES-1210-52/ME:5#
show igmp_snooping static_group
Purpose
To display the IGMP snooping static group information on the
Switch.
Syntax
show igmp_snooping statis_group vlan <vlan_name 32> |
vlanid <vlanid_list> | <ipaddr>}
Description
The show igmp_snooping statis_group command displays the
IGMP snooping static group information on the Switch.
Parameters
<vlan_name 32> − The name of the VLAN for which IGMP snooping