DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
13
To display information about currently logged-in users.
The show session command displays a list of all the users that are
logged-in at the time the command is issued. The information
includes the session ID (0 for the first logged-in user, 1 for the next
logged-in user, etc.), the Protocol used to connect to the Switch, the
user’s IP address, the user’s access Level (1=user, 15=admin), and
the account name on the Switch.
Example usage:
To display the way users logged in:
DES-1210-52/ME:5# show session
Command: show session
ID Live Time From Level Name
--- --------------- --------------------------------------- ------- ---------------
0 00:14:10 Serial Port 5 anonymous
Total Entries: 1
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
To display information about the Switch.
The show switch command displays information about the Switch
settings, including Device Type, MAC Address, IP configuration,
Hardware/Software version, System information, and Switch
Network configuration.
Example usage:
To display the Switch information:
DES-1210-52/ME:5# show switch
Command: show switch
Device Type : DES-1210-52/ME
MAC Address : 00-01-02-03-04-05
To Next Page
Loading...
