D-Link DES-1210-52/ME - Show Command_History

DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
348
DES-1210-52/ME:5# ?
Command: ?
?
CPU_Loading
cable diagnostic port
clear address_binding dhcp_snoop binding_entry ports
clear arptable
clear counters
clear ethernet_oam ports
clear fdb
clear flood_fdb
clear igmp_snooping data_driven_group
clear log
clear mld_snooping data_driven_group
clear tech support
config 802.1p default_priority
config 802.1p user_priority
config 802.1x auth_mode ports
config 802.1x auth_parameter ports
config 802.1x auth_protocol
config 802.1x capability ports
config 802.1x fwd_pdu system
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a ALL
show command_history
Purpose
To display the command history.
Syntax
show command_history
Description
The show command_history command displays the command
history.
Parameters
None.
Restrictions
None.
Example usage:
To display the command history:
DES-1210-52/ME:5# show command_history
Command: show command_history
?
config 802.1pq
show log_software_module
config log_save_timing log_trigger
config ipv6 nd ns ipif System retrans_time qinteger 1-3600>