DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
19
Success.
DES-1210-52/ME:5#
Used to display the current autoconfig status of the Switch.
The show autoconfig command is used to list the current status of
the auto configuration function.
Example usage:
To display the autoconfig status:
DES-1210-52/ME:5# show autoconfig
Command: show autoconfig
Autoconfig State: Disabled
Timeout : 50 sec
DES-1210-52/ME:5#
To enable the MAC address auto learning on the switch.
The enable auto learing command enables the MAC address auto
learning feature on the Switch.
Only administrator-level users can issue this command.
Example usage:
To enable auto learning on the Switch:
DES-1210-52/ME:5# enable auto learning
Command: enable auto learning
Success.
DES-1210-52/ME:5#
To disable the MAC address auto learning of the switch.
To Next Page
Loading...
