D-Link DES-1210-52/ME - Page 414

DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
396
 destination_mac <macmask> – Specifies a MAC address
mask for the destination MAC address in the following
format: 000000000000-FFFFFFFFFFFF.
 802.1p – Specifies that the Switch examine the 802.1p
priority value in the frame’s header.
 ethernet_type – Specifies that the Switch examine the
Ethernet type value in each frame’s header.
ip - Specifies that the Switch examines the IP fields in each packet
with special emphasis on one or more of the following:
icmp – Specifies that the Switch examines the Protocol field in
each frame’s IP header , and that the value must be 1 (Internet
Control Message Protocol- ICMP) for the action to take place.
 type – Specifies that the Switch examines each frame’s
ICMP Type field.
 code – Specifies that the Switch examines each frame’s
ICMP Code field.
igmp – Specifies that the Switch examine each frame’s protocol
field and it must be 2 (Internet Group Management Protocol-
IGMP) for the action to take place.
 type – Specifies that the Switch examine each frame’s
IGMP Type field.
tcp – Specifies that the Switch examines each frames protocol
field and its value must be 6 (Transmission Control Protocol-
TCP) for the action to take place.
 src_port_mask <hex 0x0-0xffff> – Specifies a TCP port
mask for the source port.
 dst_port_mask <hex 0x0-0xffff> – Specifies a TCP port
mask for the destination port.
 flag_mask – Specifies the appropriate flag_mask
parameter.
udp – Specifies that the Switch examines each frame’s protocol
field and it’s value must be 17 (User Datagram Protocol-UDP) in
order for the action to take place..
 src_port_mask <hex 0x0-0xffff> – Specifies a UDP port
mask for the source port.
 dst_port_mask <hex 0x0-0xffff> – Specifies a UDP port
mask for the destination port.
packet_content_mask – Specifies the frame content mask.
[offset1 | offset2 | offset3 | offset4] – Specifies the mask pattern
offset of frame.
Ipv6 – Specifies that the Switch examines the IPv6 fields in each
packet with special emphasis on one or more of the following:
class – Examine the class field of the IPv6 header.
source_ipv6_mask <ipv6mask> – Specifies the IPv6 address
mask for the source IP.
destination_ipv6_mask <ipv6mask> – Specifies the IPv6 address
mask for the destination IP.
tcp – Specifies that the Switch examines each frames protocol
field and its value must be 6 (Transmission Control Protocol-
TCP) for the action to take place.
 src_port_mask <hex 0x0-0xffff> – Specifies a TCP port
mask for the source port.
 dst_port_mask <hex 0x0-0xffff> – Specifies a TCP port