D-Link DES-1210-52/ME - Show Greeting_Message

DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
42
Command: config greeting_message
Greeting Messages Editor
================================================================================
DES-1210-52/ME Fast Ethernet Switch
Command Line Interface
Firmware: Build 20.01.B045
Copyright(C) 2012 D-Link Corporation. All rights reserved.
================================================================================
<Function Key> <Control Key>
Ctrl+C Quit without save left/right/
Ctrl+W Save and quit up/down Move cursor
Ctrl+D Delete line
Ctrl+X Erase all setting
Ctrl+L Reload original setting
show greeting_message
Purpose
Used to view the currently configured greeting message configured
on the Switch.
Syntax
show greeting_message
Description
The show greeting_message command is used to view the
currently configured greeting message on the Switch.
Parameters
None.
Restrictions
None.
Example usage:
To view the currently configured greeting message:
DES-1210-52/ME:5# show greeting_message
Command: show greeting_message
DES-1210-52/ME Fast Ethernet Switch
Command Line Interface
Firmware: Build 20.01.B045
Copyright(C) 2012 D-Link Corporation. All rights reserved.
DES-1210-52/ME:5#