D-Link DES-1228/ME - Page 120

DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
116
show stp
Purpose
Used to display the Switch’s current STP configuration.
Syntax
show stp
Description
This command is used to display the Switch’s current STP configuration.
Parameters
None
Restrictions
None.
Example usage:
To display the status of STP on the Switch:
Status 1: STP enabled with STP compatible version
DES-1228/ME:5#show stp
Command: show stp
STP Bridge Global Settings
---------------------------
STP Status : Enabled
STP Version : STP compatible
Max Age : 20
Hello Time : 2
Forward Delay : 15
Max Hops : 20
TX Hold Count : 6
Forwarding BPDU : Enabled
DES-1228/ME:5#