D-Link DES-1228/ME - Page 163

DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
159
show gvrp
Purpose
Used to display the GVRP status for a port list on the Switch.
Syntax
show gvrp {<portlist>}
Description
This command is used to display the GVRP status for a port list on
the Switch.
Parameters
<portlist> − Specifies a port or range of ports for which the GVRP
status is to be displayed.
Restrictions
None.
Example usage:
To display GVRP port status:
DES-1228/ME:5#show gvrp 1-10
Command: show gvrp 1-10
Global GVRP : Disabled
Port PVID Reassigned GVRP Ingress Acceptable Frame Type
PVID State Checking
---- ---- ---------- -------- -------- ------------------------
1 1 - Disabled Enabled All Frames
2 1 - Disabled Enabled All Frames
3 1 - Disabled Enabled All Frames
4 1 - Disabled Enabled All Frames
5 1 - Disabled Enabled All Frames
6 1 - Disabled Enabled All Frames
7 1 - Disabled Enabled All Frames
8 1 - Disabled Enabled All Frames
9 1 - Disabled Enabled All Frames
10 1 - Disabled Enabled All Frames
Total Entries : 10