D-Link DES-1228/ME - Page 248

DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
244
clear arptable
Purpose
Used to remove all dynamic ARP table entries.
Syntax
clear arptable
Description
This command is used to remove dynamic ARP table entries from
the Switch’s ARP table. Static ARP table entries are not affected.
Parameters
None.
Restrictions
Only Administrator level, Operator level or Power User level users
can issue this command.
Example Usage:
To remove dynamic entries in the ARP table:
DES-1228/ME:5#clear arptable
Command: clear arptable
Success.
DES-1228/ME:5#