D-Link DES-1228/ME - Page 310

DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
306
Example usage:
To disable asymmetric VLANs:
DES-1228/ME:5#disable asymmetric_vlan
Command: disable asymmetric_vlan
Success.
DES-1228/ME:5#
show asymmetric_vlan
Purpose
Used to view the asymmetric VLAN state on the Switch.
Syntax
show asymmetric_vlan
Description
This command is used to display the asymmetric VLAN state on the
Switch
Parameters
None.
Restrictions
None.
Example usage:
To display the asymmetric VLAN state currently set on the Switch:
DES-1228/ME:5#show asymmetric_vlan
Command: show asymmetric_vlan
Asymmetric VLAN: Enabled
DES-1228/ME:5#