D-Link DES-1228/ME - Page 342

DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
338
To display DoS prevention information for Land Attack:
DES-1228/ME:5# show dos_prevention land_attack
Command: show dos_prevention land_attack
DoS Type: Land Attack
State: Enabled
Action: Mirror
Port: 7
Priority: 5
Rx Rate(Kbit/sec): 1024
Frame Counts: 10000
DES-1228/ME:5#
To display DoS prevention information for Blat Attack:
DES-1228/ME:5# show dos_prevention blat_attack
Command: show dos_prevention blat_attack
DoS Type: Blat Attack
State: Enabled
Action: MirrorToPort
Port: 7
Priority: no_change
Rx Rate(Kbit/sec): no_limit
Frame Counts: 10500
DES-1228/ME:5#
clear dos_prevention counters
Purpose
Used to clear the counters of the prevention of each DoS attack.
Syntax
clear dos_prevention counters { land_attack | blat_attack | smurf_attack |
tcp_null_scan | tcp_xmascan | tcp_synfin | tcp_syn_srcport_less_1024}
Description
This command is used to clear the counters of the prevention of each
DoS attack.
Parameters
The type of DoS attack. Possible values are as follows:
land_attack
blat_attack
smurf_attack
tcp_null_scan
tcp_xmascan
tcp_synfin
tcp_syn_srcport_less_1024
Restrictions
Only Administrator level, Operator level or Power User level users can
issue this command.