D-Link DES-1228 - Page 166

DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
161
config radius
requests. The default is 1812.
acct_port <udp_port_number 1-65535> − The UDP port number for accounting requests.
The default is 1813.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To configure the RADIUS settings:
DES-1228/ME:4#config radius 1 10.48.74.121 key dlink default
Command: config radius 1 10.48.74.121 key dlink default
Success.
DES-1228/ME:4#
config radius parameter
Purpose Used to configure parameters for radius servers.
Syntax
config radius parameter {timeout <int 1-255> | retransmit <int 1-255>}(1)
Description Used to configure parameters for radius servers.
Parameters
timeout <int 1-255> − The time in second for waiting server reply.
Default value is 5 seconds.
retransmit <int 1-255> − The count for re-transmit.
Default value is 2.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To configure the timeout option for radius servers.
DES-1228/ME:4# config radius parameter timeout 3
Command: config radius parameter timeout 3
Success.
DES-1228/ME:4#
show radius
Purpose Used to display the current RADIUS configurations on the Switch.
Syntax
show radius
Description
The show radius command is used to display the current RADIUS configurations on the
Switch.
Parameters None.
Restrictions None.
Example usage:
To display RADIUS settings on the Switch:
DES-1228/ME:4#show radius
Command: show radius