D-Link DES-1228 - Technical Support Commands

DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
284
43
TECHNICAL SUPPORT COMMANDS
The Technical Support commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table.
Command Parameters
show tech_support
upload tech_support_to_TFTP <ipaddr> <path_filename 64>
Each command is listed, in detail, in the following sections.
show tech_support
Purpose Used to show the information for technical support.
Syntax
show tech_support
Description This command is especially used by the technical support personnel to dump the device’s
overall operation information. The information is project dependent and includes the
following information.
Basic System information
system log
Running configuration
Layer 1 information
Layer 2 information
Application
OS status
Parameters None.
Restrictions Only Administrator-level users can issue this command.