D-Link DES-1228 - Page 98

DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
93
1 default 00-00-5E-00-01-01 10 Dynamic
1 default 00-00-74-60-72-2D 10 Dynamic
1 default 00-00-81-05-00-80 10 Dynamic
1 default 00-00-81-05-02-00 10 Dynamic
1 default 00-00-81-48-70-01 10 Dynamic
1 default 00-00-E2-4F-57-03 10 Dynamic
1 default 00-00-E2-61-53-18 10 Dynamic
1 default 00-00-E2-6B-BC-F6 10 Dynamic
1 default 00-00-E2-7F-6B-53 10 Dynamic
1 default 00-00-E2-82-7D-90 10 Dynamic
1 default 00-00-F8-7C-1C-29 10 Dynamic
1 default 00-01-02-03-04-00 CPU Self
1 default 00-01-02-03-04-05 10 Dynamic
1 default 00-01-30-10-2C-C7 10 Dynamic
1 default 00-01-30-FA-5F-00 10 Dynamic
1 default 00-02-3F-63-DD-68 10 Dynamic
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
config multicast port_filtering_mode
Purpose Used to configure the multicast packet filtering mode on a port per port basis.
Syntax
config multicast port_filtering_mode [<portlist> | all] [forward_unregistered_groups
| filter_unregistered_groups]
Description This command will configure the multicast packet filtering mode for specified ports on the
Switch.
Parameters
[<portlist> | all] – Enter a port or list of ports for which to configure the multicast port
filtering mode. Entering the all parameter will denote all ports on the switch.
[forward_unregistered_groups | filter_unregistered_groups] – The user may set the
filtering mode to any of these three options.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To configure the multicast filtering mode to forward all groups on ports 1 through 4.
DES-1228/ME:4#config multicast port_filtering_mode 1-4 forward_unregistered_groups
Command: config multicast port_filtering_mode 1-4 forward_unregistered_groups
Success.
DES-1228/ME:4#
show multicast port_filtering_mode
Purpose Used to show the multicast packet filtering mode on a port per port basis.
Syntax
show multicast port_filtering_mode
Description This command will display the current multicast packet filtering mode for specified ports on
the Switch.
Parameters None.
Restrictions None.
Example usage: