DES-3010F / DES-3010G / DES-3018 / DES-3026 Layer 2 Switch CLI Reference Manual
show sim
Hold time – Displays the time in seconds the Switch will hold
discovery results before dropping it or utilizing it.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To show the SIM information in detail:
Firmware Version : 1.01.005
DES-3026:4#show sim
Command: show sim
SIM Version : VER-1.50
Device Name :
MAC Address : 00-35-26-11-11-00
Capabilities : L2
Platform : DES-3026 L2 Switch
SIM State : Enabled
Role State : Candidate
Discovery Interval : 30 sec
Hold Time : 100 sec
DES-3026:4#
To show the switch sim settings after bing added to the SIM group:
DES-3026:4#show sim
Command: show sim
SIM Version : VER-1.50
Firmware Version : 1.01.005
Device Name :
MAC Address : 00-35-26-11-11-00
Capabilities : L2
Platform : DES-3026 L2 Switch
SIM State : Enabled
Role State : Member
Discovery Interval : 30 sec
Hold Time : 100 sec
---------------------------CS Info------------------------------------
CS Group Name : default
CS MAC Addr : 00-53-10-08-00-00
CS Holdtime : 90s
DES-3026:4#
138
To Next Page
Loading...
