DES-3010F/DES-3010FL/DES-3010G/DES-3018/DES-3026 Fast Ethernet Switch Manual
Port Mapping Priority CoS
Port Mapping Priority CoS can only be used if it has been previously configured for the selected ports in the Priority
Setting menu. There are two Class of Service levels available.
Figure 8- 10. Port Mapping Priority CoS
Use the From/To menu to select the ports being configured, the selected ports must frist be configured for port-based
priority in the Priority Setting menu. Select the Class level for the port(s), there are two levels 3 for high priority and 0 for
low priority.
MAC Priority Setting
Use the MAC Setting menu to assign Class of Service levels to specific destination MAC addresses.
Figure 8- 11. MAC Priority Setting
Type in the MAC Address, select the Class ID priority level and click the Apply button.
102
To Next Page
Loading...
