DES-3000 Series Layer 2 Switch CLI Reference Manual
154
show igmp_snooping group
Purpose Used to display the current IGMP snooping group configuration on the
Switch.
Syntax
show igmp_snooping group {vlan <vlan_name 32>}
Description This command will display the current IGMP snooping group configuration
on the Switch.
Parameters
<vlan_name 32> The name of the VLAN for which to view IGMP snooping
group configuration information.
Restrictions None.
Example usage:
To show IGMP snooping group:
DES-3026:4#show igmp_snooping group
Command: show igmp_snooping group
VLAN Name : default
Multicast group: 224.0.0.2
MAC address : 01-00-5E-00-00-02
Reports : 1
Port Member : 3,4
Total Entries : 1
DES-3026:4#
show router_ports
Purpose Used to display the currently configured router ports on the Switch.
Syntax
show router_ports {vlan <vlan_name 32>} {[static | dynamic]}
Description This command will display the router ports currently configured on the
Switch.
Parameters
<vlan_name 32> The name of the VLAN on which the router port resides.
static Displays router ports that have been statically configured.
dynamic Displays router ports that have been dynamically configured.
Restrictions None.
Example usage:
To display the router ports.
To Next Page
Loading...
