DES-3000 Series Layer 2 Switch CLI Reference Manual
183
To create an 802.1x user:
DES-3026:4#create 802.1x user dtremblett
Command: create 802.1x user dtremblett
Enter a case-sensitive new password:******
Enter the new password again for
confirmation:******
Success.
DES-3026:4#
show 802.1x user
Purpose Used to display the 802.1x user accounts on the Switch.
Syntax
show 802.1x user
Description
The show 802.1x user command is used to display the 802.1x
Port-based or MAC-based Network Access control local users
currently configured on the Switch.
Parameters None.
Restrictions None.
Example usage:
To view 802.1X users currently configured on the Switch:
DES-3026:4#show 802.1x user
Command: show 802.1x user
Index User Name
-------------- --------------
1 Trinity
The Total Entry is : 1
DES-3026:4#
delete 802.1x user
Purpose Used to delete an 802.1x user account on the Switch.
Syntax
delete 802.1x user <username 15> {force_agree}
Description
The delete 802.1x user command is used to delete the 802.1x Port-
based or MAC-based Network Access control local users currently
configured on the Switch.
Parameters
<username 15> A username can be as many as 15 alphanumeric
characters.
force_agree – Entering this parameter will bypass the “Are you
sure?” question and immediately delete the account.
Restrictions Only Administrator-level users can issue this command.
To Next Page
Loading...
