DES-3000 Series Layer 2 Switch CLI Reference Manual
187
To display the current authentication session statistics for port 16:
DES-3026:4#show auth_session_statistics ports 1
Command: show auth_session_statistics ports 1
Port number : 1
SessionOctetsRx 0
SessionOctetsTx 0
SessionFramesRx 0
SessionFramesTx 0
SessionId
SessionAuthenticMethod Remote Authentication
Server
SessionTime 0
SessionTerminateCause SupplicantLogoff
SessionUserName Trinity
CTRL+C ESC q Quit SPACE n Next Page Enter Next Entry a All
show auth_statistics
Purpose Used to display the current authentication statistics.
Syntax
show
auth_statistics {ports <portlist>}
Description
The show auth_statistics command is used to display the
current authentication statistics of the Switch on a per port basis.
Parameters
ports <portlist> Specifies a range of ports to be viewed.
Restrictions None.
Example usage:
To display the current authentication statistics for port 1:
To Next Page
Loading...
