DES-3000 Series Layer 2 Switch CLI Reference Manual
35
show snmp community
community. This string is used like a password to give remote
SNMP managers access to MIB objects in the Switch’s SNMP
agent.
Restrictions None.
Example usage:
To display the currently entered SNMP community strings:
DES-3026:4#show snmp community
Command: show snmp community
SNMP Community Table
Community Name View Name Access Right
-------------------- --------------------- ------------
dlink ReadView read_write
private CommunityView read_write
public CommunityView read_only
Total Entries: 3
DES-3026:4#
config snmp engineID
Purpose Used to configure a name for the SNMP engine on the Switch.
Syntax
config snmp engineID <snmp_engineID 10-64>
Description
The config snmp engineID command configures a name for the
SNMP engine on the Switch.
Parameters
<snmp_engineID 10-64> An alphanumeric string between 10 and
64 characters that will be used to identify the SNMP engine on the
Switch.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To give the SNMP agent on the Switch the name “0035636666”
DES-3026:4#config snmp engineID 0035636666
Command: config snmp engineID 0035636666
Success.
DES-3026:4#
To Next Page
Loading...
