DES-3000 Series Layer 2 Switch CLI Reference Manual
88
CTRL+C ESC q Quit SPACE n Next Page p Previous
Page r Refresh
Status 2 : STP disabled
DES-3026:4#show stp
Command: show stp
STP Status : Disabled
Max Age : 20
Hello Time : 2
Forward Delay : 15
Priority : 32768
Default Path Cost : 802.1T
STP Version : RSTP
TX Hold Count : 3
Forwarding BPDU : Enabled
DES-3026:4#
show stp ports
Purpose Used to display the Switch’s current per-port group STP configuration.
Syntax
show
stp ports <portlist>
Description This command displays the Switch’s current per-port group STP
configuration.
Parameters
<portlist> Specifies a port or range of ports to be configured.
Restrictions None.
Example usage:
To display the STP port settings:
DES-3026:4#show stp ports
Command: show stp ports
STP Port Information
-------------------------------
Port Index : 1
Connection : Link Down
State : Yes
Cost : *2000000
Priority : 128
Edge : No
P2P : Yes
Status : Disabled
Role : Disabled
To Next Page
Loading...
