D-Link DES-3010G - Priority Settings

DES-3010F/DES-3010FL/DES-3010G/DES-3018/DES-3026 Fast Ethernet Switch Manual
Priority Settings
The Priority Setting window will allow users to configure the CoS priority settings on a port per port basis. When CoS tagged
packets arrive on the switch, they are mapped to the settings configured here. For example, if a port has been assigned a MAC
priority, the packet that has the CoS priority assigned to a MAC address will be sent to the CoS queue configured for that MAC
address. Once the configuration has been completed, users may see the results in the Priority Settings Table seen here. After
configuring the port priorities, users may adjust the individual CoS settings on the other windows located in the CoS folder of the
Switch. To view the following window, click CoS > Priority Settings.
Figure 8- 7. Priority Setting
Configure the following Priority Setting parameters:
Parameter Description
From/To
Users may select a port or group of ports to assign ToS priority settings, based on the
following Main Select field.
Main Select
Select the general priority settings for the ports previously stated using the pull-down
menu. Priority option include:
• none – Choosing this option will clear the selected ports form having CoS priority
settings.
• port_priority – Choosing this option will assign ports to map CoS priorities to
individual ports.
• 802.1p_priority - Choosing this option will assign ports to map CoS priorities to
802.1p priorities.
• MAC-Base - Choosing this option will assign ports to map CoS priorities to MAC
addresses.
• tos - Choosing this option will assign ports to map CoS priorities to ToS priorities.
• dscp- Choosing this option will assign ports to map CoS priorities to DSCP
priorities.
Click Apply to implement changes made.
97