DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
113
Command: config mirror port 1 add source ports 2-7 both
Success.
DES-3028P:4#
Example usage:
To delete the mirroring ports:
DES-3028P:4#config mirror port 1 delete source port 2-4
both
Command: config mirror 1 delete source 2-4 both
Success.
DES-3028P:4#
enable mirror
Purpose Used to enable a previously entered port mirroring configuration.
Syntax
enable mirror
Description This command, combined with the disable mirror command below,
allows the user to enter a port mirroring configuration into the Switch,
and then turn the port mirroring on and off without having to modify
the port mirroring configuration.
Parameters None.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To enable mirroring configurations:
DES-3028P:4#enable mirror
Command: enable mirror
Success.
DES-3028P:4#
disable mirror
Purpose Used to disable a previously entered port mirroring configuration.
Syntax
disable mirror
Description This command, combined with the enable mirror command above,
allows the user to enter a port mirroring configuration into the Switch,
and then turn the port mirroring on and off without having to modify
the port mirroring configuration.
Parameters None.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To disable mirroring configurations:
DES-3028P:4#disable mirror
To Next Page
Loading...
