DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
120
disable gvrp
Restrictions Only Administrator-level users can issue this command.
Example usage:
To disable the Generic VLAN Registration Protocol (GVRP):
DES-3028P:4#disable gvrp
Command: disable gvrp
Success.
DES-3028P:4#
show vlan
Purpose Used to display the current VLAN configuration on the Switch
Syntax
show vlan [<vlan_name 32> | v
lanid <vidlist> | ports <portlist> ]
Description This command displays summary information about each VLAN
including the VLAN ID, VLAN name, VLAN Type, the
Tagging/Untagging status, and the Member/Non-
member/Forbidden status of each port that is a member of the
VLAN.
Parameters
<vlanid> Specifies a range of multiple VLAN IDs to be displayed.
<ports> Specifies the ports to be displayed.
<vlan_name 32> The VLAN name of the VLAN for which to
display a summary of settings.
<portlist> Specifies a port or range of ports that will be displayed.
Restrictions None.
Example usage:
To display the Switch’s current VLAN settings:
DES-3028P:4#show vlan
Command: show vlan
VID : 1 VLAN Name : default
VLAN Type : Static Advertisement : Enabled
Member Ports : 1-28
Static Ports : 1-28
Current Tagged Ports :
Current Untagged Ports : 1-28
Static Tagged Ports :
Static Untagged Ports : 1-28
Forbidden Ports :
Total Entries : 1
DES-3028P:4#
To display the Switch’s current VLAN settings for a specific port:
To Next Page
Loading...
