D-Link DES-3028 - LLDP Configuration Management

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
140
DES-3028P:4# config
i
gmp access
_
authentication
ports all state enable
Command: config igmp access_auth
e
ntication ports
all state enable
Success.
DES-3028P:4#
show igmp access_authentication
Purpose Used to display the current IGMP Access Control configuration.
Syntax
show igmp access_authentication ports [all | <portlist>]
Description The show igmp access_authentication ports command displays the
current IGMP Access Control configuration.
Parameters
<portlist>  specifies a range of ports to be displayed.
Restrictions None.
Example usage:
To display IGMP Access Control status for all ports :
DES-3028P:4# show igmp access_authentication ports
1-4
Command: show igmp access_authentication ports 1-4
Port State
----- ---------
1 Enabled
2 Disabled
3 Disabled
4 Enabled
DES-3028P:4#