D-Link DES-3028 - Page 15

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
10
enable password encryption
Purpose Used to enable password encryption on a user account.
Syntax
enable password encryption
Description The user account configuration information will be stored in the
configuration file, and can be applied to the system at a time in the
future. If the password encryption is enabled, the password will be in
encrypted form. If password encryption is disabled and the user
specifies the password in encrypted form, or if the password has
been converted to encrypted form by the last enabled password
encryption command, the password will still be in encrypted form. It
can not revert back to plain text.
Parameters None.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To enable password encryption on the Switch.
DES-3028P:4#enable password encryption
Command: enable password encryption
Success.
DES-3028P:4#
disable password encryption
Purpose Used to disable password encryption on a user account.
Syntax
disable password encryption
Description The user account configuration information will be stored in the
configuration file, and can be applied to the system at a time in the
future. If the password encryption is enabled, the password will be in
encrypted form. If password encryption is disabled and the user
specifies the password in encrypted form, or if the password has
been converted to encrypted form by the last enabled password
encryption command, the password will still be in encrypted form. It
can not revert back to plain text.
Parameters None.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To disable password encryption on the Switch.
DES-3028P:4#disable password encryption
Command: disable password encryption
Success.
DES-3028P:4#