DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
180
config cpu access_profile
profile ID.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To configure CPU access list entry:
DES-3028P:4#config cpu access_profile profile_id 3 add access
id 1 ip vlan default
source_ip 20.2.2.3 destination_ip 10.1.1.252 dscp 3 icmp type 11 code 32 port all
deny
Success.
DES-3028P:4#
delete cpu access_profile
Purpose Used to delete a previously created CPU access profile.
Syntax
delete cpu access_profile profile_id <value 1-3>
Description The delete cpu access_profile command is used to delete a previously
created CPU access profile.
Parameters
profile_id <value 1-3> Enter an integer between 1 and 3 that is used to
identify the CPU access profile to be deleted with this command. This value
is assigned to the access profile when it is created with the create cpu
access_profile command.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To delete the CPU access profile with a profile ID of 1:
DES-3028P:4#delete cpu access_profile profile_id 1
Command: delete cpu access_profile profile_id 1
Success.
DES-3028P:4#
show cpu access_profile
Purpose Used to view the CPU access profile entry currently set in the Switch.
Syntax
show cpu access_profile profile_id <value 1-3>
Description The show cpu access_profile command is used view the current CPU interface
filtering entries set on the Switch.
Parameters
profile_id <value 1-3> Enter an integer between 1 and 3 that is used to identify the
CPU access profile to be deleted with this command. This value is assigned to the
access profile when it is created with the create cpu access_profile command.
Restrictions None.
Example usage:
To Next Page
Loading...
