DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
32
To enable the port security trap log setting:
DES-3028P:4#enable port_security trap_log
Command: enable port_security trap_log
Success.
DES-3028P:4#
disable port_security trap_log
Purpose Used to disable the trap log for port security.
Syntax
disable port_security trap_log
Description This command, along with the enable port_security trap_log, will
disable the sending of log messages to the Switch’s log and SNMP
agent when the port security of the Switch has been triggered.
Parameters None.
Restrictions None.
Example usage:
To enable the port security trap log setting:
DES-3028P:4#enable port_security trap_log
Command: enable port_security trap_log
Success.
DES-3028P:4#
To Next Page
Loading...
