DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
102
Example usage:
To configure the traffic scheduling mechanism for each QoS queue:
DES-3028P:4#config scheduling_mechanism strict
Command: config scheduling_mechanism strict
Note: The strict mode is only supported at the highest
queue
and the other lower queues will still work at WRR mode.
Success.
DES-3028P:4#
show scheduling_mechanism
Purpose Used to display the current traffic scheduling mechanisms in use on
the Switch.
Syntax
show scheduling_mechanism
Description This command will display the current traffic scheduling mechanisms
in use on the Switch.
Parameters None.
Restrictions None.
Example usage:
To show the scheduling mechanism:
DES-3028P:4#show scheduling_mechanism
Command: show scheduling_mechanism
QOS scheduling_mechanism
CLASS ID Mechanism
-------- -----------
Class-0 strict
Class-1 strict
Class-2 strict
Class-3 strict
DES-3028P:4#
To Next Page
Loading...
