DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
136
DES-3028P:4#show router_ports
Command: show router_ports
VLAN Name : default
Static router port : 1-2,10
Dynamic router port :
Total Entries: 1
DES-3028P:4#
show igmp_snooping group
Purpose Used to display the current IGMP snooping configuration on the
Switch.
Syntax
show igmp_snooping group {vlan <vlan_name 32>}
{data_driven}
Description This command will display the current IGMP setup currently
configured on the Switch.
Parameters
<vlan_name 32> The name of the VLAN for which to view IGMP
snooping group information.
data_driven hen the data driven learning is enabled, the multicast
filtering mode for all ports are ignored.
Restrictions None.
Example usage:
To view the current IGMP snooping group:
To Next Page
Loading...
