D-Link DES-3052P - Page 167

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
162
DES-3028P:4#show acct_client
Command: show acct_client
radiusAcctClient
---------------------------------------------------------------------------------
radiusAcctClientInvalidServerAddresses 0
radiusAcctClientIdentifier D-Link
radiusAuthServerEntry 0
---------------------------------------------------------------------------------
radiusAccServerIndex 1
radiusAccServerAddress 10.53.13.199
radiusAccClientServerPortNumber 0
radiusAccClientRoundTripTime 0
radiusAccClientRequests 0
radiusAccClientRetransmissions 0
radiusAccClientResponses 0
radiusAccClientMalformedResponses 0
radiusAccClientBadAuthenticators 0
radiusAccClientPendingRequests 0
radiusAccClientTimeouts 0
radiusAccClientUnknownTypes 0
radiusAccClientPacketsDropped 0
CTRL+C ESC q Quit SPACE n Next Page Enter Next Entry a All
show auth_client
Purpose Used to display the current RADIUS authentication client.
Syntax
show auth_client
Description The show auth_client command is used to display the current
RADIUS authentication client currently configured on the Switch.
Parameters None.
Restrictions None.
Example usage:
To view the current RADIUS authentication client: