D-Link DES-3052P - Page 289

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
284
DES-3028P:4#
config igmp_snooping multicast_vlan_group
Purpose Used to configure the multicast group which will be learned with the specific
multicast VLAN.
Syntax
<vlan_name 32> [ add <mcast_address_list> | delete
[<mcast_address_list> | all]]
Description Used to configure the multicast group which will be learned with the specific
multicast VLAN. There are two cases need to be considered. The join packet
will be learned with the multicast VLAN that contain the destination multicast
group. If the destination multicast group of the join packet can not be classified
into any multicast VLAN that this port belong, then the join packet will be
learned with the natural VLAN of the packet.
Note: The same multicast group can not be
overlapped in different multicast VLANs. Multiple
multicast groups can be added to a multicast VLAN.
Parameters
<vlan_name 32>  The name of the multicast VLAN to be configured, each
multicast VLAN is given a name that can be up to 32 characters.
<mcast_address_list>  The list of multicast groups that will be learned with the
specified multicast VLAN.
all  All multicast groups will be selected from the specified multicast VLAN.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To add a group to a multicast VLAN:
DES-3028P:4#config igmp_snooping multicast_vlan_group v1 add 225.1.1.1
Command: config igmp_snooping multicast_vlan_group v1 add 225.1.1.1
Success.
DES-3028P:4#
show igmp_snooping multicast_vlan_group
Purpose Used to display the multicast groups configured for the specified
multicast VLAN.
Syntax
show igmp_snooping multicast_vlan_group {< vlan_name 32> }
Description Used to display the multicast groups configured for the specified
multicast VLAN.
Parameters
<vlan_name 32>  The name of the multicast VLAN to be configured,
each multicast VLAN is given a name that can be up to 32 characters.
Restrictions None.
Example usage:
To display the multicast groups configured for a multicast VLAN.