D-Link DES-3052P - Page 47

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
42
DES-3028P:4#create snmp group sg1 v3 noauth
_
nopriv
read_view v1 write_view v1 notify_view v1
Command: create snmp group sg1 v3 noauth
_
nopriv read
_
view
v1 write_view v1 notify_view v1
Success.
DES-3028P:4#
delete snmp group
Purpose Used to remove an SNMP group from the Switch.
Syntax
delete snmp group <groupname 32>
Description The delete snmp group command is used to remove an SNMP
group from the Switch.
Parameters
<groupname 32>  An alphanumeric name of up to 32 characters that
will identify the SNMP group the new SNMP user will be associated
with.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To delete the SNMP group named “sg1”.
DES-3028P:4#delete snmp group sg1
Command: delete snmp group sg1
Success.
DES-3028P:4#
show snmp groups
Purpose Used to display the group-names of SNMP groups currently configured on
the Switch. The security model, level, and status of each group are also
displayed.
Syntax
show snmp groups
Description The show snmp groups command displays the group-names of SNMP
groups currently configured on the Switch. The security model, level, and
status of each group are also displayed.
Parameters None.
Restrictions None.
Example usage:
To display the currently configured SNMP groups on the Switch: