DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
46
create trusted_host
Management VLAN. If no IP addresses are specified, then there is
nothing to prevent any IP address from accessing the Switch,
provided the user knows the Username and Password.
Parameters
<ipaddr> The IP address of the trusted host to be created.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To create the trusted host:
DES-3028P:4#create trusted_host 10.48.74.121
Command: create trusted_host 10.48.74.121
Success.
DES-3028P:4#
create trusted_host network
Purpose Used to create the trusted host subnet.
Syntax
create trusted_host network <network_address>
Description The create trusted host network command creates the trusted host
subnet. The Switch allows users to specify up to ten IP network
addresses that are allowed to manage the Switch via in-band SNMP
or TELNET based management software. These IP addresses must
be members of the Management VLAN. If no IP addresses are
specified, then there is nothing to prevent any IP address from
accessing the Switch, provided the user knows the Username and
Password.
Parameters
<network_address> The IP address and netmask of the trusted host
to be created.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To create the trusted host network:
DES-3028P:4#create trusted_host network 10.48.74.121/16
Command: create trusted_host network 10.48.74.121/16
Success.
DES-3028P:4#
show trusted_host
Purpose Used to display a list of trusted hosts entered on the Switch using
the create trusted_host command above.
Syntax
show trusted_host
Description This command is used to display a list of trusted hosts entered on
the Switch using the create trusted_host command above.
Parameters None.
Restrictions Only Administrator-level users can issue this command.
To Next Page
Loading...
