D-Link DES-3052P - Page 53

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
48
Success.
DES-3028P:4#
delete trusted_host all
Purpose Used to delete all trusted host entries made using the create
trusted_host ipaddr and create trusted_host network commands
above.
Syntax
delete trusted _host all
Description This command is used to delete all trusted host entries made using
the create trusted_host ipaddr and create trusted_host network
commands above.
Parameters None.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To delete all trusted host entries:
DES-3028G:4# delete trusted_host all
Command: delete trusted_host all
Success.
enable snmp traps
Purpose Used to enable SNMP trap support.
Syntax
enable snmp traps
Description The enable snmp traps command is used to enable SNMP trap
support on the Switch.
Parameters None.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To enable SNMP trap support on the Switch:
DES-3028P:4#enable snmp traps
Command: enable snmp traps
Success.
DES-3028P:4#
enable snmp authenticate traps
Purpose Used to enable SNMP authentication trap support.
Syntax
enable snmp authenticate traps
Description This command is used to enable SNMP authentication trap support
on the Switch.