DES-3028 DES-3028P DES-3052 DES-3052P Layer 2 Fast Ethernet Managed Switch
section of this manual.
VLAN Name
Allows the entry of a name for a previously configured VLAN.
Source IP
Enter an IP Address mask for the source IP address.
Destination IP
Enter an IP Address mask for the destination IP address.
DSCP (0-63)
This field allows the user to enter a DSCP value in the space provided, which will instruct the
Switch to examine the DiffServ Code part of each packet header and use this as the, or part
of the criterion for forwarding. The user may choose a value between 0 and 63.
Protocol
This field allows the user to modify the protocol used to configure the Access Rule Table;
depending on which protocol the user has chosen, or configured in the Access Profile Table.
Port Number
Enter the switch port number(s) to which you wish this rule to apply.
To view the settings of a previously correctly configured rule, click in the Access Rule Table to view the following window:
Figure 9- 8. Access Rule Display window (IP)
To configure the Access Rule for Ethernet, open the Access Profile Table and click Modify for an Ethernet entry. This will open
the following window:
Figure 9- 9. Access Rule Table window (Ethernet)
The user may search for the settings of a particular Access ID by entering that ID into the Access ID field above and clicking
Find. The user may display all Access ID entries by clicking the Show All Access Profile Entries
link.
118
To Next Page
Loading...
