DES-3226 NWay Standalone Fast Ethernet Switch User’s Guide
Initialize Ports(s)
Figure 7-26. Initialize Port window
This window allows you to initialize a port or group of ports. The Initialize Port Table in the bottom half
of the window displays the current status of the port(s) once you have clicked Apply.
This window displays the following information:
• Port – The port number.
• AuthState – The Authenticator PAE State will display one of the following: Initialize,
Disconnected, Connecting, Authenticating, Authenticated, Aborting, Held, ForceAuth, ForceUnauth,
and N/A.
• BackendState – The Backend Authentication State will display one of the following: Request,
Response, Success, Fail, Timeout, Idle, Initialize, and N/A.
• AdmDir – The Administrative Controlled Directions are both and in.
• OprDir – The Operational Controlled Directions are both and in.
• PortStatus – The status of the controlled port can be authorized, unauthorized, or N/A.
• PortControl – The controlled port can be forceUnauthorized, auto, or forceAuthorized.
Reauthenticate Ports(s)
Figure 7-27. Reauthenticate Port window
This window allows you to reauthenticate a port or group of ports. The Reauthenticate Port Table
displays the current status of the port(s) once you have clicked Apply.
This window displays the following information:
116
To Next Page
Loading...
