D-Link DES-3326S - Route Redistribution Commands

D-Link DES-3326S Layer 3 Switch CLI Reference
27
ROUTE REDISTRIBUTION COMMANDS
The route redistribution commands in the Command Line Interface (CLI) are listed (along with the appropriate
parameters) in the following table.
Command Parameters
create route redistribute dst ospf src [static|rip|local]
mettype [1|2]
metric <value>
create route redistribute dst rip src [static|ospf{all|internal|external|
type_1|type_2}
metic <value>
config route redistribute dst ospf src [static|rip|local]
mettype [1|2]
metric <value>
config route redistribute dst rip src [static|ospf {all |internal|external|type_1|type_2}] {metric
<value>}
delete route redistribute dst [rip|ospf]
src [local|static|ospf]
show route redistribute dst [rip|ospf]
src [rip|static|local|ospf]
Each command is listed, in detail, in the following sections.
224