D-Link DES-3326S - Show Switch

D-Link DES-3326S Layer 3 Switch CLI Reference
show switch
Purpose Used to display information about the Switch.
Syntax
show switch
Description This command displays information about the
Switch.
Parameters None.
Restrictions None.
Example Usage:
To display the Switch information:
DES-3326S:4#show switch
Command: show switch
Device Type : DES-3326S Fast-Ethernet Switch
Module Type : DES-332GS 1-port GBIC Gigabit Ethernet and 1 Stacking Port
Unit ID : 1
MAC Address : 00-05-5D-17-FF-60
IP Address : 10.90.90.90 (Manual)
VLAN Name : default
Subnet Mask : 255.0.0.0
Default Gateway : 10.1.1.254
Boot PROM Version : Build 0.00.001
Firmware Version : Build 4.01-B12
Hardware Version : 2B1
Device S/N :
System Name :
System Location :
System Contact :
Spanning Tree : Disabled
GVRP : Disabled
IGMP Snooping : Disabled
TELNET : Enabled (TCP 23)
WEB : Enabled (TCP 80)
RMON : Disabled
RIP : Disabled
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
19