D-Link DES-3326S - Port Security Commands

D-Link DES-3326S Layer 3 Switch CLI Reference
6
PORT SECURITY COMMANDS
The Switch port security commands in the Command Line Interface (CLI) are listed (along with the appropriate
parameters) in the following table.
Command Parameters
config port_security <portlist>|all
admin_state [enable|disable]
max_learning_addr <0-10>
lock_address_mode
[Permanent|DeleteOnTimout|DeleteOnReset
]
delete
port_security_entry
vlan_name <vlan_name 32> mac_address
<macaddr> port <port>
clear
port_security_entry
port <portlist>
show port_security
Each command is listed, in detail, in the following sections.
35