xStack DES-3526 / DES-3526DC Layer 2 Stackable Fast Ethernet Managed Switch User Manual
62
Static VLAN Entry
In the Configuration folder, open the VLAN folder and click the Static VLAN Entry link to open the following window:
Figure 6- 39. Current 802.1Q Static VLANs Entries window
The 802.1Q Static VLANs window lists all previously configured VLANs by VLAN ID and VLAN Name. To delete an existing
802.1Q VLAN, click the corresponding X button under the Delete heading.
To create a new 802.1Q VLAN, click the Add button in the 802.1Q Static VLANs window. A new window will appear, as
shown below, to configure the port settings and to assign a unique name and number to the new VLAN. See the table below for a
description of the parameters in the new window.
Figure 6- 40. 802.1Q Static VLAN window - Add
To return to the Current 802.1Q Static VLANs Entries window, click the Show All Static VLAN Entries
link. To change an
existing 802.1Q VLAN entry, click the Modify button of the corresponding entry you wish to modify. A new menu will appear to
configure the port settings and to assign a unique name and number to the new VLAN. See the table below for a description of the
parameters in the new menu.
NOTE: The Switch supports up to 255 static VLAN entries.
To Next Page
Loading...
