DES-3526 Layer 2 Fast Ethernet Switch
config authen_login
local - Adding this parameter will require the user to be
authenticated using the local user account database on the
Switch.
none – Adding this parameter will require no authentication
to access the Switch.
NOTE: Entering none or local as an authentication
protocol will override any other authentication that follows it
on a method list or on the default method list.
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure the user defined method list “Trinity” with authentication methods tacacs, xtacacs and local, in that order.
DES-3526:4#config authen_login method_list_name Trinity method
tacacs xtacacs local
Command: config authen_login method_list_name Trinity method tacacs
xtacacs local
Success.
DES-3526:4#
Example usage:
To configure the default method list with authentication methods xtacacs, tacacs+ and local, in that order:
DES-3526:4#config authen_login default method xtacacs tacacs+ local
Command: config authen_login default method xtacacs tacacs+ local
Success.
DES-3526:4#
delete authen_login method_list_name
Purpose Used to delete a previously configured user defined method list of
authentication methods for users logging on to the Switch.
Syntax
delete authen_login method_list_name <string 15>
Description This command is used to delete a list for authentication methods for
user login.
Parameters <string 15> - Enter an alphanumeric string of up to 15 characters to
define the given method list the user wishes to delete.
Restrictions Only administrator-level users can issue this command.
184
To Next Page
Loading...
