DES-3526 Layer 2 Fast Ethernet Switch
Example usage:
To delete the method list name “Trinity”:
DES-3526:4#delete authen_login method_list_name Trinity
Command: delete authen_login method_list_name Trinity
Success.
DES-3526:4#
show authen_login
Purpose Used to display a previously configured user defined method list of
authentication methods for users logging on to the Switch.
Syntax
show authen_login [default | method_list_name <string 15> | all]
Description This command is used to show a list of authentication methods for
user login.
Parameters default – Entering this parameter will display the default method list
for users logging on to the Switch.
method_list_name <string 15> - Enter an alphanumeric string of up to
15 characters to define the given method list the user wishes to view.
all – Entering this parameter will display all the authentication login
methods currewntly configured on the Switch.
The window will display the following parameters:
Restrictions Only administrator-level users can issue this command.
Method List Name – The name of a previously configured
method list name.
Priority – Defines which order the method list protocols will
be queried for authentication when a user attempts to log on
to the Switch. Priority ranges from 1(highest) to 4 (lowest).
Method Name – Defines which security protocols are
implemeted, per method list name.
Comment – Defines the type of Method. User-defined Group
refers to server group defined by the user. Built-in Group
refers to the TACACS, XTACACS, TACACS+ and RADIUS
security protocols which are permanently set in the Switch.
Keyword refers to authentication using a technique
INSTEAD of TACACS / XTACACS / TACACS+ / RADIUS
which are local (authentication through the user account on
the Switch) and none (no authentication necessary to
access any function on the Switch).
185
To Next Page
Loading...
