DES-3526 Layer 2 Fast Ethernet Switch
delete trusted_host
Restrictions Only administrator-level users can issue this command.
Example Usage:
To delete a trusted host with an IP address 10.48.74.121:
DES-3526:4#delete trusted_host 10.48.74.121
Command: delete trusted_host 10.48.74.121
Success.
DES-3526:4#
enable snmp traps
Purpose Used to enable SNMP trap support.
Syntax
enable snmp traps
Description
The enable snmp traps command is used to enable SNMP trap
support on the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To enable SNMP trap support on the Switch:
DES-3526:4#enable snmp traps
Command: enable snmp traps
Success.
DES-3526:4#
enable snmp authenticate_traps
Purpose Used to enable SNMP authentication trap support.
Syntax
enable snmp authenticate_traps
Description This command is used to enable SNMP authentication trap support
on the Switch.
Parameters None.
48
To Next Page
Loading...
