D-Link DGS-1100-06/ME - Delete Vlan; Config Vlan

DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
125
DGS-1100-06/ME:5#create vlan v1 tag 3
Command: create vlan v1 tag 3
Success
DGS-1100-06/ME:5#
delete vlan
Purpose
To delete a previously configured VLAN on the Switch.
Syntax
delete vlan [<vlan_name 20> | vlanid <int 2-4094>]
Description
The delete vlan command deletes a previously configured VLAN on
the Switch.
Parameters
<vlan_name 20> − The name of the VLAN to be deleted.
vlanid <int 2-4092> − The VLAN of the VLAN to be deleted.
Restrictions
Only administrator or operator-level users can issue this command.
A user is required to disable Guest VLAN before deleting a VLAN.
Example usage:
To remove a vlan which VLAN ID is 2:
DGS-1100-06/ME:5#delete vlan vlanid 2
Command: delete vlan vlanid 2
Success
DGS-1100-06/ME:5#
config vlan
Purpose
To add additional ports to a previously configured VLAN and to
modify a VLAN name.
Syntax
config vlan [<vlan_name 20> | vlanid <vlanid 1-4094>] [[add
[tagged | untagged] | delete ] <portlist>
Description
The config vlan command allows the user to add or delete ports to
the port list of a previously configured VLAN. You can specify the
additional ports as tagging, untagging, or forbidden. The default is to
assign the ports as untagged.
Parameters
<vlan_name 20> − The name of the VLAN to be configure.
vlanid <vlanid 1-4094 > − The ID of the VLAN to which to add ports.
add − Specifies that ports are to be added to a previously created
vlan.
delete - Specifies that ports are to be deleted from a previously
created vlan.
tagged − Specifies the additional ports as tagged.
untagged − Specifies the additional ports as untagged.
<portlist> − A port or range of ports to be added to or deleted from
the VLAN.
Restrictions
Only administrator or operator-level users can issue this command.
Example usage:
To add ports 5 as tagged ports to the VLAN 3: